CPE IMPACT

MODIFIER

No agglomeration, free-flowing, premium packaging and certificates of analysis'

Supplier & Distributor of

CPE FOR PVC

Ravlek 146

Ravlek 156

Main general purpose grade for rigid PVC modification. 

Suitable for bulk silo use.

Ravlek 300

Harder CPE grade avoiding agglomeration issues in warmer climates. 

CPE FOR THE RUBBER INDUSTRY

Ravlek 500

Ravlek 501

High molecular weight and Mooney viscosity. Excellent mechanical properties. Suitable for rubber that requires extra mechanical strength.

High Mooney viscosity. Suitable for rubber wire, or other rubber products. High tensile stress at a given elongation.

Ravlek 502

Ravlek 503

High molecular weight, high Mooney viscosity. Suitable for rubber products that demand good mechanical properties.

High molecular weight and Mooney viscosity. Suitable for rubber that demands higher mechanical strength.

Ravlek 504

Ravlek 505

Used in rubber products such as cable and wires or other rubber products. 

Used in rubber products such as cable and wires or other rubber products. Alternative to Tyrin 3630E.

Ravlek 506

Ravlek 507

High molecular weight and Mooney viscosity. Suitable for rubber that requires higher mechanical strength.

Used in rubber products such as cable and wires or other rubber products.

Ravlek 508

Ravlek 509

Used in rubber products such as cable and wires or other rubber products.

Mooney viscosity is moderate. Better processing performance and suitable for oil and flame resistant products.

CPE FOR THE IMPACT MODIFICATION AND FLAME RETARDANCY FOR ABS COMPOUNDS

Ravlek 700

Ravlek 700 is a flame retardant and impact modifier for use in ABS mouldings, with superior fusion and excellent flow.

Features: Ravlek 700 is a CPE with superior fusion and excellent flow.

Basic Properties:

Chlorine Content (%): 35 ± 2
Heat of Fusion J/g: 2.0
Shore A Hardness: < 60
Tensile Strenth (Mpa): 6.0
Elongation at Break %: 600
Volatile Content %: 0.4
Sieve residue (30 mesh) %: ≤ 2.0

Ravlek 900

Cable grade to replace CM3630E.

© 2018 by Michael Ballance Plastics Limited | Registration No. 3155716

Michael Ballance Plastics was formed in 1992 and is a major supplier of PVC Compounds and Chemical Additives to the Plastic and Rubber Industry.

Find out more about us

  • Facebook Social Icon
  • Twitter Social Icon

Address:

'Office Afloat', Barton Marina

Burton-upon-Trent, DE13 8DZ

United Kingdom

Telephone:

+44 1283 711 512